Also included special tiny and light Power Distribution Board (PDB). Can be solder direct XT60 connector.
- Increase vertical clearance from 9.5mm to 10mm
- More easier to do maintenance. No need to remove propellers on opening
- Motors can be grab now on changing broken propeller.
- 15 grams lighter.
- Top and side strap mounting for HD camera.
- Include TPU landing pads
- M3x8mm aluminum screws (Top Plate & FC Mount) – 12 pieces
- M3x10mm aluminum screws (PDB screws) – 2 pieces
- M3x6mm aluminum screws (main body) – 12 pieces
- TPU Motor/Landing Pad – 4 pieces
- M3 nylon hex nuts (PDB lock and FC mount) – 10 pieces
- M3x25mm hex standoffs – 4 pieces
- M3x10mm hex standoffs (body spacers) – 6 pieces
- Power Distribution Board – 1 piece
- XT60 – 1 piece
- 3D Printed Side Skirt Cover – 2 pieces
- Antenna tube mount
- Carbon fiber top plate – 1 piece
- Carbon fiber upper body plate – 1 piece
- Carbon fiber bottom body plate – 1 piece
- Carbon fiber camera mounting plate (25 and 35 degrees tilt) – 2 pieces
- Carbon fiber VTX mounting plate – 1 piece
- Battery Strap 1 – piece
|Motor||22xx motors (Eg. 2204 2300kv)|
|FPV Camera||Up to 32x32mm board camera|
|ESC||Any ESC with dimension of 23mm x 12mm or less, BN20A, KISS, SN20A, ZTR Spider 18A|
|Flight Controller||Regular size Naze32 / DragonFly32 / Flip32 / Dodo|
|VTX||200mw with pigtail SMA / RP-SMA wire|
|HD Camera||GoPro 3 & 4, Xiamo Yi, Mobius|